It is known that today’s tractors are safer than previous ones. But it’s also a fact that accidents have only increased in recent past years. Therefore, it is necessary for an operator to learn all the tractor safety tips to minimize the risks. This blog discusses tractor safety in detailed steps. Stay attached till the end of the blog to learn about tractor safety and methods to operate a farm tractor safely. Also, we will learn about tractor safety features and tractor safety frames.
Tractor safety is the ways or methods of operating a farm tractor safely and thus minimizing the causes of death due to farm tractors. Agriculture Tractor safety is of utmost concern nowadays as tractor accidents are one of the leading causes of death. The US Department of Labor says, “Around 40 per cent of farm fatalities in 2017 were due to tractor accidents”.

Such farm fatalities in a single country due to a single problem in farmland can make farmlands scary. Furthermore, it was also observed that using ROPS and seatbelts in the tractor effectively reduced the above farm fatalities by 99%. Henceforth, it is quite clear that tractor safety and the related disciplines are important.
The below-given steps for safely using a farm tractor are of utmost importance, even if you’re a trained operator. We have covered all aspects of farm tractor safety and its safe operation. As we have seen in the previous section, that denoted data from the USA explaining the causes of deaths in farmlands.
We have sorted out nine steps for your safety while operating a farm tractor. Do read and follow the tractor safety rules while driving a tractor. Also, take tractor safety precautions whenever and wherever needed.

We have sorted out nine steps for your safety while operating a farm tractor. Do read and follow.
Before starting a tractor, make sure that your tractor health and safety are well enough to take it to the farmlands. Consider the below tractor safety test guidelines as the ultimate farm tractor safety checklist.
Always make a safe stop before leaving your seat to maintain tractor safety. Use handbrakes when the tractor stops and stop the engine before getting off the farming machine. In this chain of cautiousness, make sure you have removed the key and all implements and tools are safely put to rest.
The driver’s seat is the only safe place in the tractor to operate it. Make sure you have everything in control while you locate yourself in the driver’s seat. You should be aware of each control button, switch, side mirror, etc. and how to use them for the best of your surroundings. Below are some of the prime points to look out for when talking about the driver’s seat.
Usually, carelessness leads to accidents. In this step, we will discuss how taking the power of a tractor and handling it to the fullest matters.
You might think that these small steps mentioned above are just enough. But, there are more tractor safety tips to this list you might haven’t noticed. A tractor operator needs more skills than a normal 4-wheeler or six-wheeler driver. Let us discuss some considerable points:
When you operate a farm tractor, you need to take care of farm labours across the farmland. Furthermore, coordination between the tractor operator and other farm labourers is necessary. As it is the first step toward a safer farm operation. And use the passenger seat only if there is any space for passengers.
Accidents often happen while hitching or unhitching tractor implements or tractor-mounted machines. To stop such accidents, do consider the following steps.
Sometimes other implements such as PTO shafts, trailers, maintaining trailer brakes and other related machinery can cause major damage to health and property. There should be a safe working system all around the tractor to maintain tractor safety.
A tractor can bring unwanted damage if it is near electric powerlines. If poles aren’t high enough, they can be fatal to the tractor operator. Therefore, mind the overhead electric powerlines.
Let us focus on some key points in preventing overturn. Always keep in mind that overturning can take place on flat ground as well. However, slopes are the major reason for overturning and related deaths. The overturning can be prevented by ballast weighing the tractor just as in the second lever order.
0 Comments